Table of Contents
Advertisement
Room/Baby Monitor
This feature allows you to monitor sounds in
another room. Place the handset in the
room you wish to monitor; it will function as
a microphone. A second handset can be set
to function as a remote speaker, allowing
you to monitor sounds in the room. Ô
Using Room/Baby Monitor
1. Press the
soft key and select the
MENU
Room Monitor menu.
Monitor
appears.
2. Select the handset you want to monitor
by using
VOL/RING/
3. Press the
soft key.
OK
RoomMonitor
appears, and you hear
sounds in the room where the handset
is installed.
4. To turn off the Room Monitor, press the
soft key, or
END
end
Handset Setup
The following submenu options must be set
separately for each handset.
Programming your Voice Mail
Access Number
1. Press the
soft key. Select the
MENU
Handset Setup menu, and then the Edit
Voice Mail submenu.
No.
appears.
2. Enter your personal access number
using the number keypad (
,
, the
/tone/<
#/>
DELETE
the
soft key (up to 20 digits).
PAUSE
3. Press the
soft key. You will hear the
OK
confirmation tone.
To delete the current Voice Mail Access
Number, delete all numbers in Step 2 using
the
soft key and the
DELETE
This feature only works
when the handset(s) is
within the range of the
base.
To Room
or
.
VOL/RING/
.
Edit V_mail
-
),
0
9
soft key, or
soft key.
OK
Ô
Ô
NOTE
17
Advertisement
Table of Contents
