Repeating A Message - Radio Shack 43-3704 Owner's Manual

64
standby. After you have reviewed your
new messages, you can play your old
messages by selecting
and pressing
L2 ANSWER
" again. Once you have listened
STOP
to a new message, it then becomes an
old message. The old messages will be
played in the order in which they were
received.

Repeating a message

1. Press
L1 ANSWER
2. Press
! PLAY/
messages. The number of stored
messages is announced.
3. To repeat the current message, press
REPEAT/SELECT
of beginning the message. To quickly
scroll backwards through a message,
press and hold
To repeat the previous message, press
REPEAT/SELECT
seconds (about 4 seconds during remote
operation) after a message begins
playing. If you have several messages,
press
REPEAT/SELECT
until you return to the message you want
to replay. If the current message is the
first new message, the system plays
back from the beginning of the current
message (it does not go back into the old
message group).
4. Press
! PLAY/
stop reviewing messages and return to
standby.
The message counter shows the
number of messages stored in memory.
L1 ANSWER
! PLAY/
or
L2 ANSWER
to review your
"
STOP
after a few seconds
REPEAT/SELECT
within a few
repeatedly
" at any time to
STOP
or
.
.