New Message Led - Radio Shack 43-3704 Owner's Manual

NEW MESSAGE LED

The new message LED on the handset is
designed to work with your answering
system. The LED flashes when you have
new messages in your answering system.
The LED stops flashing when all new
messages are played back
Answering System Settings
To set the following seven functions you
must enter the menu mode. Ô
Setting the Time
Follow these steps to set the clock on the
answering system to the correct time. Ô
1. Press
CLOCK/MENU
2. Press
SKIP/SELECT
REPEAT/SELECT
day is announced and the
corresponding number (from
to 7 Saturday) appears.
3. Press to select the day.
SET
4. Press
SKIP/SELECT
REPEAT/SELECT
correct hour setting.
The numbers
the base as each hour is announced.
5. Press to select the hour.
SET
6. Press
SKIP/SELECT
REPEAT/SELECT
correct minute setting.
The numbers
on the base as each minute is
announced.
7. Press to select the minute.
SET
.
or
until the correct
1
or
until you hear the
through appear on
1 12
or
until you hear the
00 through 59 appears
Ô
Answering System
Settings
• For your convenience,
voice prompts will guide
you through the menu
setup mode.
• A confirmation tone
sounds to indicate
standby mode.
• You can also set these
menus from the handset.
Sunday
See "Answering System
Setup" on page 24 for
instructions.
Setting the Time
Time stamp will not be
heard until you have set the
time.
Ô
NOTES
57