Radio Shack 43-3704 Owner's Manual page 25

3. Press
CID/VOL/
select Ring Time submenu, and then
the soft key.
OK
4. Press
CID/VOL/
select a Ring Time (Toll Saver, 2 Times,
4 Times, or 6 Times).
5. Press the
OK
confirmation tone.
Setting the Record Time
Record Time sets the duration for recording
the incoming messages. You have three
record time options. The options "one
minute" or "four minutes" set the duration for
recording the incoming messages.
"Announce only" answers the call but
prevents the caller from leaving a message.
1. Press the
MENU
Answ. Setup menu.
2. Press
CID/VOL/
select or
Line1
soft key.
3. Press
CID/VOL/
select Record Time submenu, and then
the soft key.
OK
4. Press
CID/VOL/
select Record Time (1 Minute, 4
Minutes, or Announce Only).
5. Press the
OK
confirmation tone.
Setting the Message Alert On or Off
Message Alert sounds an alert tone when
you have an unheard message. If you set
the Message Alert on, whenever a new
message is received, the soft alert tone will
sound every 15 seconds.
or
REDIAL/P/
or
REDIAL/P/
soft key. You will hear a
soft key. Select the
or
REDIAL/P/
, and then the
Line2
or
REDIAL/P/
or
REDIAL/P/
soft key. You will hear a
to
to
to
OK
to
to
25