Using The Fingerprint Reader - Lenovo ThinkPad X1 User Manual

To remove the microSD card:
1. Flip the kickstand open to locate the microSD card slot.
2. Push the microSD card inward a little until you hear a click. The microSD card ejects.
3. Gently slide the card out of the card slot.

Using the fingerprint reader

Depending on the model, your computer might have a fingerprint reader. With fingerprint authentication, you
can log in to your computer by swiping your fingerprints instead of entering the password.
Enrolling your fingerprints
To enable fingerprint authentication, enroll your fingerprints first by doing the following:
Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.
1. Open the Start menu
2. Follow the instructions on the screen to enroll your fingerprint.
When you scan your finger over the fingerprint reader, note the following:
1. Tap the fingerprint reader with the top joint of your finger and hold your finger there for one or two
seconds with a little pressure.
2. Lift your finger to complete one scan.
, then tap Settings ➙ Accounts ➙ Sign-in options.
.
Chapter 3 Using your computer
19