Removal steps of the rear-facing camera module
When installing: Ensure that the connector is attached firmly.
1070 Fingerprint-reader module
The fingerprint-reader module is only available on some models.
Before you start, do the following:
1. Follow the instructions in "Before servicing the tablet" on page 46.
2. For access, remove the back cover assembly. See "1010 Back cover assembly" on page 48.
3. Remove the connector of the built-in battery from the system board. See step 1 in "1050 Built-in
battery" on page 54.
56
ThinkPad 10 Hardware Maintenance Manual
1