Using The Fingerprint Reader - Lenovo ThinkPad 10 20E3 User Manual

To enable the plug-and-play feature:
1. Go to Control Panel. For information about accessing the Control Panel, see "Accessing tablet settings"
on page 20.
2. Tap Hardware and Sound.
3. Tap Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, tap Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
To remove a smart card:

Using the fingerprint reader

Depending on the model, your tablet might have a fingerprint reader. With fingerprint authentication, you can
log in to your tablet by swiping your fingerprints instead of entering the password.
Enrolling your fingerprints
To enable fingerprint authentication, enroll your fingerprints first by doing the following:
Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.
• For Windows 8.1:
1. Tap Settings ➙ Change PC settings ➙ Accounts ➙ Sign-in options.
2. Follow the instructions on the screen to enroll your fingerprint.
• For Windows 10:
1. Open the Start menu
Note: Settings might not be displayed in the Start menu. In this case, tap All apps to find Settings.
2. Follow the instructions on the screen to enroll your fingerprint.
18
ThinkPad 10 User Guide
Hold the card with the metal contacts
toward the smart card reader. Insert the card into the smart card reader
as shown.
Tap and hold the Safely Remove Hardware and Eject Media icon in
the Windows notification area and select the smart card that you want
to remove. Pull the card outward a little. Then slide the card out of
the slot as shown.
, then tap Settings ➙ Accounts ➙ Sign-in options.
a
facing downward and pointing