Table of Contents
Advertisement
5.
Click
Next
. The program extracts the firmware files and places them in a folder
identified in the InstallShield Wizard window.
NOTE:
Note the folder to which the firmware file is saved.
6.
Click
Finish
to exit the program.
7.
Connect a computer that runs the Windows operating system to either the RS-232 port
or the Configuration port of the switcher (see
details).
8.
Start the Universal Switcher Control Program and connect to the front panel
Configuration (USB) port on the switcher. See
9.
Click
Tools
>
Update firmware
Firmware Loader appears (see figure 14).
10.
Select the FOX SW8 and click
(see figure 15).
10
Figure 14.
Extron Firmware Loader Window
11.
Navigate to and select the new firmware file. Click
window closes.
ATTENTION: The firmware file must have an .S19 extension. Other file types can
cause the switcher to stop functioning.
Figure 15.
Choose Firmware File Window
"Installation and
"Starting the
or the Update Firmware button ( ). The Extron
>
. The Choose Firmware File screen appears
File
Open
Open
11
11
Operation" for more
program," on page 15.
. The Choose Firmware File
FOX SW8 • Remote Control
18
Advertisement
Table of Contents
