Home > Basic Settings > Lan - D-Link DAP-3520 User Manual

DAP-350 User's Manual
Home > Basic Settings > LAN
LAN is short for Local Area Network. This is considered your internal network. These are the
IP settings of the LAN interface for the DAP-3520. These settings may be referred to as private
settings. You may change the LAN IP address if needed. The LAN IP address is private to your
internal network and cannot be seen on the Internet.
Get IP From:
IP Address:
Subnet Mask:
Default Gateway:
D-Link AirPremier N Dual Band Exterior PoE Access Point
Static IP (Manual) is chosen here. Choose this option if you do not
have a DHCP server in your network, or if you wish to assign a static
IP address to the DAP-3520. When Dynamic IP (DHCP) is selected,
the other fields here will be grayed out. Please allow about 2 minutes
for the DHCP client to be functional once this selection is made.
The default IP address is 192.168.0.50. Assign a static IP address
that is within the IP address range of your network.
Enter the subnet mask. All devices in the network must share the
same subnet mask.
Enter the IP address of the gateway in your network. If there is a
gateway in your network, please enter an IP address within the range
of your network.
Using the Configuration Menu
30