D-Link DAP-3520 User Manual page 34

DAP-350 User's Manual
MAC Source:
MAC Address:
D-Link AirPremier N Dual Band Exterior PoE Access Point
MTU: You may need to change the Maximum Transmission Unit for optimal
performance with your specific ISP. The default MTU is 1500.
Enable: The default MAC address is set to the WAN's physical interface MAC
address on the DAP-3520. You can tick this Clone MAC Address
Enable check box to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with the
MAC address of the DAP-3520. It is not recommended that you
change the default MAC address unless required by your ISP.
Use the drop-down menu to select Auto or Manual.
Manually enter an appropriate MAC address or click the Scan button
to search for a specific MAC address.
Using the Configuration Menu Using the Configuration Menu
34