D-Link DAP-3520 User Manual page 38

DAP-350 User's Manual Using the Configuration Menu
IP Address: Enter the IP address (Static IP only).
Enter the subnet mask (Static IP only).
Subnet Mask:
Enter the gateway IP address provided by your ISP.
Gateway:
DNS Address: The DNS server information will be supplied by your ISP (Internet
Service Provider).
Enter the server IP provided by your ISP (optional).
Server IP/Name:
PPTP Acount: Enter your PPTP account name.
PPTP Password: Enter your PPTP password.
PPTP Retype Password: Retype your PPTP password.
You may need to change the Maximum Transmission Unit for optimal
MTU:
performance with your specific ISP. The default MTU is 1400.
Enable: The default MAC address is set to the WAN's physical interface MAC
address on the DAP-3520. You can tick this Clone MAC Address
Enable check box to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with the
MAC address of the DAP-3520. It is not recommended that you
change the default MAC address unless required by your ISP.
Use the drop-down menu to select Auto or Manual.
MAC Source:
Manually enter an appropriate MAC address or click the Scan button
MAC Address:
to search for a specific MAC address.
38
D-Link AirPremier N Dual Band Exterior PoE Access Point