D-Link DAP-3520 User Manual page 19

DAP-350 User's Manual
Auto Channel
Selection:
Channel Width:
Remote AP MAC Address:
Site Survey:
Authentication:
D-Link AirPremier N Dual Band Exterior PoE Access Point
Enabling this feature automatically selects the channel that will pro-
vide the best wireless performance. This feature is not supported
in WDS with AP mode. The channel selection process only occurs
when the AP is booting up.
Channel:
All devices on the network must share the same channel. To change
the channel, use the pull-down menu to make the desired selection.
(Note: The wireless adapters will automatically scan and match the
wireless settings.)
Allows you to select the channel width you would like to operate in.
Select 20 MHz if you are not using any 802.11n wireless clients.
Auto 20/40 MHz allows you to both 802.11n and non-802.11n wire-
less devices on your network.
Enter the MAC addresses of the APs on your network that will serve as
bridges to wirelessly connect multiple networks.
Click on the Scan button to search for available wireless networks,
then click on the available network that you want to connect with. .
Use the pull-down menu to choose Open System, Shared Key, or
WPA-Personal.
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings. If multi-SSID is enabled, this
option is not available.
Select WPA-Personal to secure your network using a password
and dynamic key changes. No RADIUS server is required.
Using the Configuration Menu
19