Transport Using A Crane - Siemens GH180 Operating Instructions Manual

Preparing for Use
4.8 Transportation and Handling
Incorrect lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors,
or fans.
Protect the cabinet and protruding parts against damage. Always lift the transport units with
the appropriate spreading devices or hoisting tackle.
Procedure
1. Push the lifting rods through the holes.
2. Place the sling ropes on the ends of the lifting rods and secure the ends of the lifting rods
3. To lift the transport unit, use single sling ropes or two ropes with a cross stitch. Attach the
4.8.3

Transport Using a Crane

NOTICE
Minimum clearance between crane and cabinet
A minimum clearance of 51 ´´ (1.3 m) must be maintained to avoid deformation of the drive
cabinet.
If this minimum clearance cannot be maintained, spreader bars of suitable strength must be
used.
80
CAUTION
using the splint.
crane rope to the ends of the lifting rods and then lift the cabinet. Avoid displacing the center
of gravity or distorting the cabinet. When suspended, the cabinet must be parallel to the
ground.
SINAMICS PERFECT HARMONY GH180 6SR41 manufactured in NMA Nuernberg, Germany
Operating Instructions Rev.201706301306