Table of Contents
Advertisement
52120A
Users Manual
OUTPut:TERMinal:ROUTe(?) <cpd>
Description Sets or gets which front-panel output terminal is in use.
Parameters <cpd>
Example
[:SOURce]:CURRent:RANGe(?) <nrf>
Description Sets or gets the current range of the Product.
Parameters <nrf>
Example
[:SOURce]:CURRent:LCOMp(?) <bool>
Description Sets or gets the state of the LCOMP (inductive-load compensation)
Parameters <bool> =
Example
[:SOURce]:CURRent:COMPliance?
Description Retrieves the percentage of compliance.
Example
SYSTem:VERSion?
Description Retrieves the SCPI command version of the Product.
Examples
Returns
SYSTem:ERRor?
Description Retrieves an error from the error queue. Errors are retrieved in first-in,
Examples
3-10
OUTP?
=
LOW
HIGH
OUTP:TERM HIGH
OUTP:TERM?
=
2
=
20
=
120
CURR:RANG 20
CURR:RANG?
function.
ON or 1
OFF or 0
CURR:LCOM ON
CURR:LCOM?
CURR:COMP?
SYST:VERS?
1999.0
first-out (FIFO) sequence. The response has two elements: a code number
and error message. For some messages, supplementary information is
supplied by a ";" separated clause. The error queue stores a maximum of
50 errors at which point no more errors are stored until errors are removed
from the queue.
SYST:ERR?
Gets back
if the Product is in operate mode.
1
Gets back
when the Product is in standby
0
mode.
Output current on LOW terminals. 2A and 20A
ranges.
Output current on HI terminals. All ranges.
Puts the output current through the HI terminals
on the front panel of the Product.
Gets back
or
.
HIGH
LOW
Sets output current range to 2 A.
Sets output current range to 20 A.
Sets output current range to 120 A.
Sets output current range to 20 A.
Gets back
,
, or
2
20
120
Turns on LCOMP.
Turns off LCOMP.
LCOMP on.
Gets back
or
.
1
0
Gets back a number that shows the percentage of
compliance.
Gets back the SCPI version.
This is an example. The number returned can be
different,
Gets back the error at the head of the queue
(earliest).
.
Advertisement
Table of Contents
