•
Do not connect to live output terminals. The Product can
supply voltages that can cause death. Standby mode is not
sufficient to prevent electrical shock.
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•
Always ensure the Product is in STBY mode and external
circuits are not energized before you make cable
connections or disconnecting either end of the cables.
•
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V
dc.
•
Do not use the Product if it operates incorrectly.
•
Do not use test leads if they are damaged. Examine the test
leads for damaged insulation. Do a continuity test on the
test leads.
Symbols
Symbols used in this manual and on the Product are explained in Table 1.
Symbol
Chassis ground
Conforms to European Union
P
directives.
Risk of Danger. Important information.
W
See manual.
Earth ground
J
Do not dispose of this product as unsorted municipal waste. Go to Fluke's website for recycling
~
information.
Table 1-1. Symbols
Description
Introduction and Specifications
Symbol
Conforms to relevant North American
)
Safety Standards.
Protective earth
.
Hazardous voltage
X
Conforms to relevant Australian EMC
requirements.
Safety Information
Description
1
1-5