Visual And Audio Warning Systems; Service Engine Light And Obd-M Mil Kit - Mercury 6.2L MPI Manual

A 90‑amp fuse located near the flame arrestor, protects the engine power harness if an electrical overload occurs. The fuse is
translucent so it can be inspected if the fuse has failed and is open.
b
a
A 15‑amp fuse located at the aft end of the engine, protects the accessory circuits.
b
a
This power package uses a clean power harness that is connected to the engine starting battery. This clean power harness
minimizes an excessive voltage drop to the engine and drive digital control electrical system. This harness is protected by a
5‑amp fuse and is located near the engine starting battery.

Visual and Audio Warning Systems

Service Engine Light and OBD‑M MIL Kit
Boats powered by emissions control technology (ECT) catalyzed engines must be equipped with a SmartCraft‑enabled gauge
capable of displaying the service engine icon, or a dash‑mounted service engine light. Malfunction indicator lamp (MIL) kits
containing a dash‑mounted service engine light and a special harness that connects to the engine harness may be purchased
separately.
90-8M0128973 MAY 2017
eng
a - 90‑amp fuse
b - Hot stud
56871
c
a -
b -
c -
32206
a
c
b
Section 1 - Getting to Know Your Power Package
Cover
15‑amp fuse
Accessory harness
a - 5‑amp fuse
b - Positive battery terminal (harness lead with fuse)
c - Negative battery terminal
43608
Page 19