Table of Contents
Advertisement
2 Loosen the screws on the image plane adjustment mechanism.
3 Adjust the focus around the screen by manually turning the peripheral
focus ring to the left or right.
4 Tighten the screws on the image plane adjustment mechanism to
secure the unit.
The focus on the center of the screen does not change very much even
after adjusting the peripheral focus so the center focus does not need to
be re-adjusted.
Zoom
1. Press the ZOOM +/− button.
• On the remote control, while pressing on the CTL button, press the D-ZOOM/ZOOM (+) or (−) button.
The zoom is adjusted.
3. Projector Adjustment and Connecting
Peripheral focus
ring
34
Image plane adjustment
mechanism screw
Advertisement
Table of Contents
