Projector Adjustment And Connecting; Flow Of Adjustment And Connecting - NEC PH1202HL Installation Manual

3. Projector Adjustment and Connecting

3-1. Flow of Adjustment and Connecting

Perform the adjustment and connection of the projector according to the the following procedure
Step 1
• Turning on the Projector (→ page 25)
Step 2
• Selecting the projector orientation (→ page 28)
Step 3
• Adjusting the Picture Size and Position (→ page 29)
Display the test pattern to adjust the screen size, screen ratio and focus.
Step 4
• Connecting to Other Equipments (→ page 35)
Step 5
• Optimizing Computer Signal Automatically (→ page 46)
This chapter explains the adjustment and connection of the projector with Steps from 1 to 5.
The adjustment and connection of the projector is completed by performing all steps in order
24