Transducer Inputs And Outputs; Records; User-Programmable Fault Reports; Starting Records - GE M60 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.4.10 Transducer inputs and outputs

6.4.10.1 RTD and DCmA inputs
ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value.
6.4.10.2 RRTD inputs
ACTUAL VALUES  METERING  TRANSDUCER I/O RRTD INPUTS  RRTD INPUT 1(12)
 RRTD INPUT 1

Actual values for each RRTD input channel that is enabled are displayed this menu. The top line the programmed RRTD ID
and the bottom line displays the metered value.

6.5 Records

6.5.1 User-programmable fault reports

ACTUAL VALUES  RECORDS  USER-PROGRAMMABLE FAULT REPORTS
 USER-PROGRAMMABLE
 FAULT REPORTS
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for information on this feature.

6.5.2 Starting records

ACTUAL VALUES  RECORDS  STARTING RECORDS  MOTOR START 1(5)
NO STARTING RECORDS
TO REPORT
or
 MOTOR START 1

M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
DCMA INPUT xx

0.000 mA
RTD INPUT xx

-50 °C
RRTD INPUT 1

-50°C
NEWEST RECORD

NUMBER: 0
LAST CLEARED DATE:

2002/8/11 14:23:57
LAST REPORT DATE:

2002/10/09 08:25:27
START 1 DATE:

2002/08/11
START 1 TIME:

00:00:00.000000
Range: Date in format YYYY/MM/DD
Range: Time in format HH:MM:SS.ssssss
RECORDS
6
6-23