Initial Pairing - Motorola IHF1700Music Motomanual

Connecting your Handset Device to the Handsfree
System
Before you can make a handsfree call, you must complete a Bluetooth connection between
the kit and your handset device. You establish a Bluetooth connection between your
handsfree system and handset device with a paired link.
When you set up a paired link, the handsfree system remembers your handset device. Once
the handsfree system and handset device are paired, your handsfree system automatically
connects to your handset device every time you start your vehicle.
This handsfree system supports paired links with up to 4 handset devices.
Note: For safety reasons, it is recommended that pairing be done while the vehicle is
stationary.

Initial Pairing

Tip: Before pairing, think of a suitable name for your handset device. For example 'Jenny's
Phone', 'Karl's Razr' etc.
Important: The process of initiating a Bluetooth connection with a handset device varies by
manufacturer. Please have your handset device's user manual available for reference if
needed.
1 Your handset device's Bluetooth feature is off by default. To use your car handsfree system,
you must first turn on the Bluetooth feature in your device. See your device's user manual.
2 Press and hold the Multi-Function button.
The handsfree system responds: Set your device in scan mode and enter 0000 if prompted
for the passcode.
The Blue LED will flash slowly during the pairing process.
3 Perform a device discovery from the handset device (See your device's user manual).
Your handset device will search for any Bluetooth devices around it. When the search is
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
4 Select Motorola IHF1700M from the list of devices.
5 If prompted by the handset device, enter the passkey 0000, and press the
6 The handsfree system responds: Pairing complete. Please say a friendly name for the
device.
Say a friendly device name for your handset device. For example, you can say 'Jenny's
Phone'
7 The handsfree system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth link. Enter
8 After a few seconds the handsfree system responds: Connection complete.
key.
OK
.
Yes