Table of Contents
Advertisement
Bluetooth (Continued)
Problem
The transceiver does not
find the Bluetooth
keyboard and/or mouse
when the connect button
of the transceiver is
pressed.
The LED on the
transceiver blinks faster
when a Bluetooth
keyboard or mouse is
detected.
"Invalid DFU file" error
message is displayed.
User Guide
Cause
The connect button
on the Bluetooth
keyboard and mouse
must be pressed
within 1 minute.
The transceiver has
found and is pairing
with a Bluetooth
device and is waiting
for another device
before timing out.
The firmware is
corrupted.
www.hp.com
Troubleshooting
Solution
After pressing the connect
button on the transceiver,
the LED will begin flashing.
Within 1 minute, press the
connect button on the
Bluetooth keyboard and/or
Bluetooth mouse. (You must
press the connect buttons
on the transceiver, mouse,
and keyboard for at least 2
seconds.) After pairing is
complete, the Bluetooth
keyboard and/or mouse
are operating in USB
wireless mode.
Once the connect button
has been pressed on the
transceiver, it will wait 1
minute to attach to a
Bluetooth keyboard and/or
mouse.
Once the connect button
on the keyboard or mouse
is pressed, the transceiver
pairs with it and is waiting
for the second device
during the remainder of the
1 minute interval.
If the 2nd device is found
within the 1 minute interval,
the blinking will stop and
the LED will turn solid since
both devices are
discovered.
Download a new firmware
update file and use the new
file to update the firmware.
A–5
Advertisement
Table of Contents
