HP DT530A User Manual page 72

4. Follow the on-screen instructions to install the software.
5. When prompted, insert the Bluetooth transceiver into a USB
connector on the computer (if it is not already inserted) and
click the OK button.
6. After the software installation is complete, a Bluetooth icon
will appear on the desktop and in the system tray.
Double-click either one of the icons to launch the Initial
Bluetooth Configuration Wizard.
7. Follow the on-screen instructions in the Initial Bluetooth
Configuration Wizard.
8. During the configuration process in the Initial Bluetooth
Configuration Wizard, the system will search for Bluetooth
devices. While the system is searching, press the Connect
button on the Bluetooth mouse for two seconds.
✎
You do not need to press the Connect button on the Bluetooth
USB transceiver.
9. If the system does not locate the Bluetooth mouse, click the
Search Again button and repeat step 8 above.
10. Once the Bluetooth mouse is displayed in the Bluetooth
Device Selection window, select the Bluetooth mouse from
the list and click the Next button. Follow the on-screen
instructions.
✎
Refer to the Help in the WIDCOMM software for information on
enhancing the wireless solution.
User Guide
Installing the Bluetooth Mouse as a Stand-Alone Device
www.hp.com 6–9