HP DT530A User Manual page 77

Installing the Bluetooth Mouse as a Stand-Alone Device
To recharge the Bluetooth mouse rechargeable batteries:
1. Plug the mouse recharge end of the USB cable included with
the Bluetooth mouse into the recharge receptacle
mouse. Connect the Type A end of the USB cable to a USB
connector on the computer.
Recharging the Bluetooth Mouse Batteries
2. Let the batteries recharge until the Broadcom Bluetooth
Control Suite (BBCS) software displays a message that they
are fully charged, then remove the USB cable from the
Bluetooth mouse and computer.
✎
The Broadcom Bluetooth Control Suite (BBCS) battery level
indicator may be less accurate when using NiCad batteries.
Recharging less frequently will extend the life of NiCad batteries.
6–14 www.hp.com
q
on the
User Guide