Centre-Rear Position Seat Belt - Mazda Mazda5 Owner's Manual

Centre-Rear Position Seat
Belt
Before using the centre-rear lap/shoulder
belt make sure tongue (A) and anchor
buckle (B) are fastened.
(A)
(B)
qFastening the Seat Belt
1. Grasp the seat belt tongue (C).
2. Slowly pull out the lap/shoulder belt.
3. Insert the seat belt tongue (C) into the
seat belt buckle (D) until you hear a
click sound.
(C)
(D)
Fastening the Centre-Rear Seat Belt
with Only One Buckle:
Fastening the centre-rear seat belt
with only one buckle is dangerous. If
only one pair of seat belt tongues and
buckles is fastened (either seat belt
tongue (C) and seat belt anchor buckle
(D) or seat belt tongue (A) and seat
belt buckle (B)), then the seat belt
cannot provide full protection. In a
sudden stop or collision, the user
could slide under the belt and suffer
serious injuries. Always make sure
that both pairs of seat belt tongues and
buckles are fastened properly.
4. Position the lap belt as low as possible,
Keep low on
hip bone
(A)
qUnfastening the Seat Belt
(B)
Refer to Unfastening the Seat Belt on
page 2-27.
Seat Belt Systems
WARNING
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
Essential Safety Equipment
Take up slack
Too high
2-31