In Case of an Emergency
Flat Tyre
qJack
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
anticlockwise.
Jack screw
7-4
Wing bolt
To secure the jack
1. Insert the wing bolt into the jack with
the jack screw pointing front and turn
the wing bolt clockwise to temporarily
tighten it.
2. Turn the jack screw in the direction
shown in the figure.
Jack screw
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.
Maintenance
Always keep the jack clean.
l
Make sure the moving parts are kept
l
free from dirt or rust.
Make sure the screw thread is
l
adequately lubricated.
Wing bolt