Dynamic Stability Control (Dsc) - Mazda Mazda5 Owner's Manual

NOTE
To turn off the TCS, press the DSC
OFF switch (page 5-36).
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
expert repairer, we recommend an
Authorised Mazda Repairer.
NOTE
In addition to the indicator light
l
flashing, a slight labouring sound
will come from the engine. This
indicates that the TCS is operating
properly.
On slippery surfaces, such as fresh
l
snow, it will be impossible to
achieve high rpm when the TCS is
on.
Starting and Driving
Dynamic Stability Control
(DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive manoeuvring,
enhancing vehicle safety.
Refer to ABS (page 5-18) and TCS (page
5-34).
DSC operation is possible at speeds
greater than 20 km/h (12 mph).
WARNING
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tyre friction and road contact
because of water on the road surface).
You can still have an accident.
Driving Your Mazda
5-35