Mazda Mazda5 Owner's Manual page 280

In Case of an Emergency
Flat Tyre
NOTE
If it is difficult to set the jack due to a
lowered vehicle height for reasons such
as a tyre puncture, insert the jack from
the middle of the vehicle and slide it to
the designated jack-up point.
6. Insert the jack lever and attach the
wheel brace to tyre jack.
7-10
7. Turn the wheel brace clockwise and
raise the vehicle high enough so that
the spare tyre can be installed. Before
removing the wheel nuts, make sure
your Mazda is firmly in position and
that it cannot slip or move.
WARNING
Do not jack up the vehicle higher than
is necessary:
Jacking up the vehicle higher than is
necessary is dangerous as it could
destabilize the vehicle resulting in an
accident.
Do not start the engine or shake the
vehicle while it is jacked up:
Starting the engine or shaking the
vehicle while it is jacked up is
dangerous as it could cause the
vehicle to fall off the jack resulting in
an accident.
Never go under the vehicle while it is
jacked up:
Going under the vehicle while it is
jacked up is dangerous as it could
result in death or serious injury if the
vehicle were to fall off the jack.