Mazda Mazda5 Owner's Manual page 336

Maintenance and Care
Owner Maintenance
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of the removal procedure.
High-mount brake light
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorised
Mazda Repairer when the replacement is
necessary.
Number plate lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
8-40
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens,
and then remove the lens by carefully
prying on the edge of the lens with a
flathead screwdriver.
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.