Selecting Wireless Network Settings From The Control Panel - Epson WF-7710 User Manual

Selecting Wireless Network Settings from the Control Panel

You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: This setting can be locked by an administrator. If you cannot access this setting, contact your
administrator for assistance.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1. Press the
2. Press the
You see a screen like this:
3. Select Router > Start Setup or Change Settings > Wi-Fi Setup Wizard.
4. Select the name of your wireless network or select Enter Manually to enter the name manually. Use
the displayed keypad to enter your network name.
home button, if necessary.
icon.
49