Printing And Scanning With Nfc From Your Android Device - Epson WF-7710 User Manual

Printing and Scanning with NFC from Your Android Device

You can easily connect your Android 4.0 or later device to your product using NFC (Near Field
Communication). Once connected, you can print and scan using Epson iPrint.
1. Make sure Epson iPrint is installed on your mobile device.
2. Make sure Simple AP mode or Wi-Fi Direct is enabled on your product and that you are using the
default Wi-Fi Direct password.
Note: NFC printing and scanning will not work if you changed the default Wi-Fi Direct password.
3. Do one of the following:
• If you are going to print, make sure paper is loaded in the product.
• If you are going to scan, place your original on the product for scanning.
4. Touch the NFC antenna of your mobile device to the NFC tag on your product.
Note: The location of your mobile device's NFC antenna varies. See your mobile device
documentation for details.
Epson iPrint opens on your device.
Note: If you do not have Epson iPrint installed, the app store page for the Epson iPrint app opens on
your device. Install Epson iPrint and repeat this step.
5. Touch the NFC antenna of your mobile device to the product NFC tag on your product again.
45