Using Wps To Connect To A Network - Epson WF-7710 User Manual

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
Note: This setting can be locked by an administrator. If you cannot access this setting, contact your
administrator for assistance.
1. Press the
2. Press the
You see a screen like this:
3. Select Router > Change Settings > Push Button Setup (WPS).
4. Follow the instructions on the LCD screen to complete WPS setup.
5. Press the
You see the
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Note: If you don't see the
Wi-Fi or Wired Networking
home button, if necessary.
icon.
home button to exit.
icon on the LCD screen and should be able to connect to your product directly from
icon, repeat these steps to try again.
54