Network Interface Specifications - Epson WF-7710 User Manual

Network Interface Specifications

Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on
purchase location.
Wi-Fi
Standard
Security
Frequency band
Maximum radio-frequency
power transmitted
Coordination modes
Ethernet
Standard
Communication mode
Connector
Security
SSL/TLS: HTTPS Server/Client, IPPS
SMTPS (STARTTLS, SSL/TLS)
Parent topic:
IEEE 802.11 b/g/n; complied with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WEP (64/128 bit)
2.4 GHz
19.8 dBm (EIRP)
Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
twisted pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
Technical Specifications
330