Epson WF-7710 User Manual page 163

You see a screen like this:
5. Select Add Entry.
6. Select Add Contact.
7. Do one of the following:
• To create a contact for scanning to email, select Email.
• To create a location for scanning to a network folder or FTP, select Scan to Network Folder/FTP.
8. Select the registry number you want to use for the contact you are adding.
9. Select the Name field, use the displayed keyboard to enter the contact name (up to 30 characters),
and press OK.
10. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for
an entry (up to 30 characters), and press OK. (This field is optional.)
11. Do one of the following:
• For an email contact, select the Email Address field, use the displayed keyboard to enter the
address, and press OK.
• For a network folder or FTP location, select the Communication Mode field and select Network
Folder (SMB) or FTP. Then select the Location field, use the displayed keyboard to enter the
location, and select OK. Enter other information if necessary.
Enter the folder path name for the Location setting in one of the following formats depending on
the Communication Mode setting you selected:
• SMB: \\host name\folder
163