Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to
connect the network cabling and supply power to your Switch.
3.3 Wall Mounting Installation
Step 1: Please find the wall that can mount the FSD-804P.
Step 2: Install two screws on the wall.
Step 3: Hang the FSD-804P on the screws from the wall.
Step 4: Repeat step 5 of Desktop Installation for power supply to the FSD-804P.
Before mounting the device to the wall, please check the location
of the electrical outlet and the length of the Ethernet cable.
Note
147.5 mm
FSD-804P Switch Bottom Side
RJ45
UTP Cable
15