Connecting The Ptz Dome Camera; Package Content - VIDEO PLUS AHP-3112S User Manual

2. Connecting the PTZ Dome Camera

Please refer to the following sections to connect, set and operate the PTZ Dome Camera. In order to control
the camera, basically a control keyboard or other control device is required.
2.1

Package Content

Before proceeding, ensure that the contents match the items listed below. If any item is missing or has defects,
DO NOT install or operate the product and contact the dealer for assistance.
PTZ Dome Camera with
Outdoor Mount Kit
Lubricant
Optical Cover
2.2 Description of Camera Parts
Configuring the PTZ Dome Camera's ID and communication protocol is required before connecting the
camera to other devices. The switches used for configuring these settings are located on the camera's back
plate. Additionally, the 22-Pin Connector for Data Cable connection and ISP Connector for firmware upgrade
kit connection are also set on the back plate.
Please refer to the diagram and table on the following page for using each switch/connector.
M3 Standard Screw (x1)
M3 Security Screw (x1)
M5 Standard Screw (x1)
M5 Security Screw (x1)
Data Cable for Power Supply, Video Alarm and RS-485 (AC
Security Torx
24V)
Quick Guide and
User Manual
Product CD
GVI Security
7