Table of Contents
Advertisement
NOTE: When turning the password on the first time, enter the Master Password to setup the
new password. The Master Password is 9527.
OSD AUTO CLOSE
Users can specify the duration for OSD menu to stay on the screen. Time selection ranges
from 5 ~ 30 seconds. To keep the OSD menu stay on the screen, please set this option to
"OFF".
SYSTEM RESET
Two types of system reset can be implemented under this item:
SYSTEM RESET
Select this function for system reboot. Press "ENTER" and the system reboot begins.
DEFAULT SYSTEM
This function allows users to restore the camera to its factory default state. Press "ENTER" and
reset starts.
EXIT
Exit the SETUP MENU 2 and return to the MAIN PAGE.
3.3.9
Default Camera
The item is for restoring the camera settings, including Backlight, Focus, AE, WBC, Digital Zoom, Slow
Shutter, Image Inverse and Aperture, to factory defaults. Once any one of the parameters mentioned
above is modified, The DEFAULT CAMERA item setting is on <OFF> automatically. Select <ON> to
set the camera parameters to default settings.
3.3.10
ID Display
Users are allowed to choose whether the dome ID will be displayed on the monitor to identify each
dome. For Dome Camera's ID setting, please refer to section 2.4 ID Setup (Analog Model).
ON
Display the ID of the selected dome on the right bottom of the monitor screen.
OFF
Hide the ID of the selected dome.
3.3.11
Title Display
Users are allowed to name a certain view area and display its title for easy recognition. With this item,
users can choose to display or not to display the titles set in advance.
ON
A title set for certain view will be displayed when the dome stays in the view area.
OFF
When the TITLE DISPLAY is set <OFF>, no title will be displayed on the screen even titles are
set in advance.
23
GVI Security
Advertisement
Table of Contents
