Table of Contents
Advertisement
FREEZE
Freeze function allows holding the image while the camera is moving between preset positions
such as in PRESET and SEQUENCE. For example, when the Dome Camera is manipulated to
run from point A to point B, if the Freeze function is activated, the first view that users would
see is point A. Then the next view would directly change to point B, without displaying the
moving path.
APERTURE
Users can adjust enhancement of the edges of objects in the picture. There are 16 levels of
adjustment; the options are <01> ~ <16>; <01> represents "no enhancement". When shooting
text, this function could make it sharp.
EXIT
Exit the SETUP MENU 1 and return to the MAIN PAGE to set other functions under the
Setup Menu 2.
3.3.8
Setup Menu 2
The SETUP MENU 2 is shown below.
FLIP
Users can track an object continuously when it passes through under the Dome Camera with
setting Flip to IMAGE (digital flip) or M.E. (mechanical flip).
IMAGE
IMAGE represents digital IMAGE FLIP, which enables users to keep tracking objects
seamlessly; under the mode, almost no delay occurs in comparing with that under the
M.E. mode.
NOTE: The Privacy Mask function will be automatically disabled if the Image Flip
function is enabled, and the screen will show "MASK WILL BE SET OFF."
M.E.
M.E. is a standard mechanical operation. As the Dome Camera tilts to the maximum
angle, it pans 180˚, and then continues tilting to keep tracking objects.
OFF
Select this item to disable the flip function.
NOTE: To make the Dome Camera tilt between a specific range, such as -10˚ to
+100˚, go to ANGLE ADJUSTER to set the angle range of tilt. The camera defaults to a
90˚ tilt setting.
21
GVI Security
Advertisement
Table of Contents
