Table of Contents
Advertisement
SEQUENCE LINE
Select a Sequence Line that the Dome Camera should execute when an alarm pin is
triggered. The sequence line(s) should be defined prior either in the SEQUENCE setup
menu or through the keyboard.
AUTOPAN LINE
Select an Auto-pan Line that the Dome Camera should execute when an alarm pin is
triggered. The Auto-pan Line(s) should be defined prior either in the AUTOPAN setup
menu or through the keyboard.
CRUISE LINE
Select a Cruise Line that the Dome Camera should execute when an alarm pin is
triggered. The Cruise Line(s) should be defined prior either in the CRUISE setup menu
or through the keyboard.
DWELL TIME
The DWELL TIME is duration of executing an alarm action. If select the PRESET mode is
selected, when alarm takes place, the Dome Camera will go to the selected preset position and
stay there for a user-defined period of time (1~127seconds/Always) when alarm takes place. If
select other modes (SEQUENCE/AUTOPAN/CRUISE) have been selected, the camera will
keep executing the selected mode (DWELL TIME: ALWAYS) until alarm condition is released
or users rotate the joystick to change the status of the Dome Camera.
NOTE: The dwell time is only adjustable when selecting Preset as the alarm action. When the
dwell time is up, the Dome Camera returns to the trigger position and rechecks the alarm pin
status.
EXIT
Exit the Alarm Setting menu and return to the Main Page.
30
GVI Security
Advertisement
Table of Contents
