Table of Contents
Advertisement
ANGLE ADJUSTER
The item is for adjusting the camera view angle. The range of view angle is between -10
and+100.
SPEED BY ZOOM
If the item is set to <ON>, the pan/tilt speed will be adjusted by internal algorithm when
zooming automatically. The larger zoom ratio leads to the lower rotation speed.
AUTO CALI. (Auto Calibration)
There are one horizontal and one vertical infrared ray check points in each dome. When the
dome camera's position is moved during installation or maintenance, the relative distance
between the original set point and the check point could be changed. Enable the Auto
Calibration function, the dome will automatically detect the distance change and reset the point
back to the original position.
PASSWORD
The administrator can activate OSD Password function for security concerns. Once the
function is turned on, users are required to enter the password every time when accessing to
the OSD menu. The Password setting menu is shown below:
The password setting procedure is like the following:
1.
Choose a number with direction keys and then press the <CAMERA
MENU> key (ENTER) to input. For example: <0> <CAMERA MENU>,
<1> <CAMERA MENU>, <2> <CAMERA MENU>, <3> <CAMERA
MENU>. PASSWORD: 0123
2.
In the second line, enter the same password again to confirm the setting.
3.
Move the cursor to <SAVE> and press <CAMERA MENU> to save the
setting.
4.
Move the cursor to <EXIT> and press <CAMERA MENU> to exit the
password setting page.
If OSD Password function is enabled, when press the <CAMERA MENU> key to enter the
OSD menu, the password request message will be displayed as shown below. Please enter the
password, press <ENTER> and then access to the OSD main menu.
22
GVI Security
Advertisement
Table of Contents
