Table of Contents
Advertisement
3.3.17
Home Setting
Users are able to set an operation mode to ensure constant monitoring; if the Dome Camera idles for
a period of time, the selected function will be activated automatically. HOME function allows constant
and accurate monitoring to avoid the Dome Camera stopping or missing events.
HOME FUNCTION
The item is used to enable or disable the HOME function. Use the left/right direction keys of
the control keyboard to change the setting.
SELECT MODE
Select one of the modes that the Dome Camera should execute when HOME function is
enabled and the RETURN TIME is up. The options include <AUTOPAN>, <SEQUENCE>,
<CRUISE> and <PRESET>. Use the left/ right direction keys on the control keyboard to change
the setting, and the items mentioned below will change in cooperating with your selection.
PRESET POINT
Select a Preset Point where the Dome Camera should go after the Return Time
function, which will be mentioned later, is activated. The preset point(s) should be set
prior either in the PRESET setup menu or through the keyboard.
SEQUENCE LINE
Select a Sequence Line that the Dome Camera should execute when an alarm pin is
triggered. The Sequence Line(s) should be defined previously in the SEQUENCE setup
menu.
AUTOPAN LINE
Select an Auto-pan Line that the Dome Camera should execute when an alarm pin is
triggered. The Auto-pan Line(s) can be defined in the AUTOPAN setup menu.
CRUISE LINE
Select a Cruise Line that the dome camera should execute when an alarm pin is
triggered. The Cruise Line(s) can be defined in the CRUISE setup menu.
RETURN TIME
The Dome Camera starts to count down RETURN TIME when the camera idles, and it
will execute the SELECT MODE function if the return time is up. The RETURN TIME
ranges from 1 to 128 minutes.
GO
If HOME function is enabled, the users are allowed to execute HOME function manually
by selecting this item.
EXIT
Exit the HOME SETTING menu and return to the MAIN PAGE.
28
GVI Security
Advertisement
Table of Contents
