Datadump - Johannus Ecclesia Choir User Manual

7. Press the MENU piston 3x to exit the Johannus Menu.
5.2

Datadump

The Datadump function sends several settings from the organ to a storage medium (the
Johannus Sequencer+, for example) through the MIDI SEQ output. See § 3.4 External
connections.
The settings to sent are: the content of all capture memory locations and all settings which can
be set via the Johannus Menu, except Key Volumes. Key Volumes settings is a part of the
intonation data. These data can be received with the optional Johannus Intonat software.
a. Sending data from the organ
1. Press the MENU piston.
Use the - and + pistons to select the Datadump
2.
functions on the display.
Press the ENTER piston. The Press ENTER text
3.
appears on the display.
4. Make sure the desired storage medium is properly
connected.
5. Press the ENTER piston. When data is being sent,
Sending data... appears on the display. Sending
data will take some time.
Do not use the organ when the Sending data... text is on the display.
6. If the data dump is complete, the main menu appears
on the display.
7. Press the MENU piston to exit the Johannus Menu.
b. Uploading data to the organ
Receiving a data file has no relation to the Johannus Menu and can be done
on every moment the organ is switched on, except when playing a Demo
Song.
Make sure to upload only data files which are recorded from the
instrument concerned. Uploading a data file from another instrument may
jeopardize the functioning of your instrument.
User Manual Ecclesia Choir / Ecclesia T-150
Mem: 1 Vol:25
Tr: 0/440 Cr: 0
Johannus Menu:
Crescendo
Johannus Menu:
Datadump
Datadump
Press ENTER
Datadump
Sending data...
Johannus Menu:
Datadump
Mem: 1 Vol:25
Tr: 0/440 Cr:--
17