Johannus Menu; Crescendo; Datadump - Johannus Ecclesia T-250 User Manual

5 JOHANNUS MENU

In the Johannus Menu several functions of the organ can be set.
Press the MENU piston to activate the Johannus Menu on the display.
Navigating the menu is done with the - and + pistons.
Confirmation of a choice is done with the SET piston.
Cancel or step back in the menu is done with the MENU piston.
The Johannus Menu consists of the following functions:
Function

Crescendo

Datadump

Expression Pedals
General Volume
Keyboard Config
Key Volumes
MIDI Config
Orchestrals
Reset Procedures
Reverb Settings
Startup Settings
Temperaments
Tremulant Vox Humana
Tuning
Version
5.1 Crescendo
The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.
Step 0 of the crescendo pedal cannot be changed.
1. Press the MENU-piston.
Use the - and + pistons to select the Crescendo function on the display.
2.
3. Press the SET piston. The first step of the crescendo pedal appears on the
display.
4. Use the - and + pistons to select the step which has to be changed.
5. Change the registration and press the SET piston to save the new registration
in the memory of the organ.
6. Repeat steps 5 and 4 if more crescendo pedal steps has to be changed.
7. Press the MENU piston 2x to exit the Johannus Menu.
5.2 Datadump
The Datadump function sends several settings from the organ to a storage medium (the
Johannus Sequencer+, for example) through the MIDI SEQ output. See § 3.4 External
connections.
User Manual Ecclesia T-250 / D-350 / D-450
More information
§ 5.1
§ 5.2
§ 5.3
§ 5.4
§ 5.5
§ 5.6
§ 5.7
§ 5.8
§ 5.9
§ 5.10
§ 5.11
§ 5.12
§ 5.13
§ 5.14
§ 5.15
23