Crescendo; Datadump - Johannus Vivaldi 150 User Manual

6. Press the MENU piston to exit the Johannus Menu.
5.2

Crescendo

The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.
Step 0 of the crescendo pedal cannot be changed.
1. Press the MENU piston.
Use the - and + pistons to select the Crescendo
2.
function on the display.
3. Press the SET piston. The first step of the crescendo
pedal appears on the display.
4. Use the - and + pistons to select the step which has to
be changed (for example step 5).
5. Change the registration and press the SET piston to
save the new registration in the memory of the organ.
6. Repeat steps 4 and 5 if more crescendo pedal steps has
to be changed.
7. Press the MENU piston 3x to exit the Johannus Menu.
5.3

Datadump

The Datadump function sends several settings from the organ to a storage medium (the
Johannus Sequencer+, for example) through the MIDI SEQ output. See § 3.4 External
connections.
The settings to sent are: the content of all capture memory locations and all settings which can
be set via the Johannus Menu, except Key Volumes. Key Volumes settings is a part of the
intonation data. These data can be received with the optional Johannus Intonat software.
a. Sending data from the organ
1. Press the MENU piston.
Use the - and + pistons to select the Datadump
2.
functions on the display.
User Manual Vivaldi 150/250/350
Am:Center Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
Ambiance
Johannus Menu:
Crescendo
Crescendo
Cres. step:
Crescendo
Cres. step:
Am:Center Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
Ambiance
Johannus Menu:
Datadump
0
5
23