7.12 Enable/Disable additional rinse
Once in Service Mode, the current status is shown by pressing buttons S1+S2 simultaneously.
With this setting, you can select an additional rinse.
On appliances without a display or with a 1-digit display, the current status is shown by the cycle end LED. If
it is on, the function is enabled, if it is turned off, then the function is disabled.
On appliances with a 3-digit display, the current status is shown by "E1" if the function is enabled and by "E0"
if the function is disabled.
To modify the enabled/disabled status, press button S1.
599 72 48-93