Advertisement

Quick Links

FSK63700P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FSK63700P

  • Page 1 FSK63700P User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    Do not leave the appliance with the open door • unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam •...
  • Page 5 ENGLISH • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • Contact the Authorised Service Centre to repair the appliance.
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container Air vent 3.1 Beam-on-Floor The Beam-on-Floor goes off when the appliance is The Beam-on-Floor is a light that is deactivated.
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button TimeSaver button Display XtraDry button Delay button Reset button Program button Indicators ExtraHygiene button 4.1 Indicators Indicator Description End indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • XtraDry soil • Rinses • Delicate crock- • Dry ery and glass- ware • Fresh soil • Wash 60 °C or 65 °C •...
  • Page 9: Settings

    ENGLISH 5.2 Information for test info.test@dishwasher-production.com institutes Write down the product number (PNC) that is on the rating plate. For all the necessary information for test performance, send an email to: 6. SETTINGS 6.1 Programme selection When you activate the appliance, usually it is in programme selection mode.
  • Page 10 German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees 11 - 14 19 - 25 1.9 - 2.5 13 - 17 4 - 10 7 - 18 0.7 - 1.8 5 - 12 <4 <7...
  • Page 11 ENGLISH How to activate the acoustic satisfied with the drying result, you can deactivate the notification for refilling signal for the end of rinse aid. However, we recommend that programme you always use rinse aid for best drying performance. The appliance must be in programme selection mode.
  • Page 12: Options

    CAUTION! In case of presence of start flashing and the display is children, the AirDry system blank. can be deactivated if you 2. Press want to keep the door closed in the end of the • The indicators cycle.
  • Page 13: Before First Use

    ENGLISH How to activate TimeSaver °C for at least 10 minutes during the last rinsing phase. Press , the related indicator comes on. How to activate ExtraHygiene If the option is not applicable to the programme, the related indicator does Press , the related indicator comes on not come on or it flashes quickly for a...
  • Page 14: Daily Use

    8.2 How to fill the rinse aid 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse dispenser aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
  • Page 15 ENGLISH Opening the door while the detergent on the inner part of the appliance door. appliance operates 4. Close the lid. Make sure that the lid locks into position. If you open the door while a programme is running, the appliance stops. It may 9.2 Setting and starting a affect the energy consumption and the programme duration.
  • Page 16: Hints And Tips

    10. HINTS AND TIPS 10.1 General we recommend that you use the tablets with long programmes. The following hints will ensure optimal • Do not use more than the correct cleaning and drying results in daily use quantity of detergent. Refer to the...
  • Page 17: Care And Cleaning

    ENGLISH • Make sure that the spray arms can • The correct quantity of detergent is move freely before you start a used. programme. 10.6 Unloading the baskets 10.5 Before starting a 1. Let the tableware cool down before programme you remove it from the appliance.
  • Page 18 11.2 Cleaning the upper spray We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To disengage the spray arm from the...
  • Page 19: Troubleshooting

    ENGLISH 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you use short duration programmes regularly, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend running long duration programmes at least twice a month.
  • Page 20 Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water The display shows authority.
  • Page 21 ENGLISH the problem occurs again, contact an Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
  • Page 22: Technical Information

    Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to- gether.
  • Page 23 ENGLISH Water supply max 60 °C Cold water or hot water Capacity Place settings Power consumption Left-on mode (W) Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.
  • Page 24 www.aeg.com/shop...

Table of Contents