Remote Control; Installing Batteries; Acendo Vibe Configuration Tool - AMX ACV-2100 ACENDO VIBE Instruction Manual

Remote Control

The Acendo Vibe includes a color matched remote control that connects wirelessly (FIG. 4):
(press to pair remote to user device)
Mute Speaker
End Call
FIG. 4
Acendo Vibe Remote Control

Installing Batteries

1.
Remove the bottom panel of the remote control to access the battery compartment:
2.
On the bottom panel, flip the plastic lock to the Unlocked position (FIG. 5):
FIG. 5
Remote control - bottom panel (lock/unlock/remove)
3.
Rotate the bottom panel to the left and lift to remove.
4.
Insert two AA batteries.
5.
Replace and lock the bottom panel.
For details and instructions on pairing the remote control to the Acendo Vibe see page 14.

Acendo Vibe Configuration Tool

Both Acendo Vibe Sound Bars are configured via the Acendo Vibe Configuration Tool software (available to download
from AMX). In most cases the default settings should work fine without any need for adjustment. Configurable settings
include:
Bluetooth (On/Off) - Click to toggle On/Off (default = On).

Bluetooth Device Name - Enter a new name for the Acendo Vibe unit. This is the device name for the Acendo Vibe

when discovered via Bluetooth (default = "Acendo Vibe").
Events (ACV-5100 only) - Configure how CEC display control operates relative to defined events, and adjust

Occupancy Sensor settings (see page 15).
Aux Out Gain - Select Variable (default) or Fixed.

Default Volume - Enter a value for the default output volume (default = 50, valid for all audio sources).

Automatic Audio Switching - Toggle On/Off (default = On).

Use the File (Open, Save and Transfer) options to save the current settings, open an existing config file, and transfer

the current settings to an Acendo Vibe via USB connection.
For details, see the Configuring Acendo Vibe Conferencing Sound Bars section on page 16.
Acendo Vibe Conferencing Soundbars - User Guide
Bluetooth Pairing
-
+
Acendo Vibe Conferencing Soundbars
Source Select pushbutton (on back side)
Mute Microphone
Volume Up/Down
(rotate ring to adjust)
Battery Compartment (bottom panel)
Unlock & twist to open
7