AMX ACV-2100 ACENDO VIBE Instruction Manual page 37

Serial Commands - ACV-5100 (Cont.)
Command
set /trigger/occupancy/delay
get /trigger/vacancy/action
set /trigger/vacancy/action
get /trigger/vacancy/delay
set /trigger/vacancy/delay
get /video/cec
set /video/cec
get /video/status
Acendo Vibe Conferencing Soundbars - User Guide
Description
Configure delay time for the occupancy detect trigger event.
Syntax:
set /trigger/occupancy/delay <delay>
Where: <delay> = 0..300 (seconds)
Get display action for the vacancy detect trigger event.
Returns:
@get /trigger/vacancy/action <display-action>
Where: <display-action> = "none" or "off"
Configure display action for the vacancy detect trigger event.
Syntax:
set /trigger/vacancy/action <display-action>
Where: <display-action> = "none" or "off"
Get delay time for the vacancy detect trigger event.
Returns:
@get /trigger/vacancy/delay <delay>
Where: <delay> = 0..300 (seconds)
Configure delay time for the vacancy detect trigger event.
Syntax:
set /trigger/vacancy/delay <delay>
Where: <delay> = 0..300 (seconds)
Get the state of CEC control on HDMI out.
Returns:
@get /video/cec <state>
Where: <state> = "off" or "on"
Disable or enable use of CEC on HDMI out.
Syntax:
set /video/cec <state>
Where: <state> = "off" or "on"
Get the status of the external connector for HDMI input.
Returns:
@get /video/status <status>
Where: <status> = "none", "connected"
Serial Commands
37