Transfer Settings From This File; Viewing/Modifying An Acendo Vibe Configuration File - AMX ACV-2100 ACENDO VIBE Instruction Manual

Transfer settings from this file

1.
In the Side menu, click File > Transfer (FIG. 43):
FIG. 43
File > Transfer
NOTE: Alternatively, click "Transfer settings from this file" in the File Open window (see FIG. 40).
2.
This selection invokes the Transfer Options window (see FIG. 47 on page 28).
3. The settings as configured in the currently open Acendo Vibe Configuration File are sent to the connected Acendo
Vibe unit.
The system indicates the progress of this transfer, and indicates when the transfer is complete (FIG. 44):
FIG. 44
Transfer - Transferring settings to Acendo Vibe unit
The system will indicate if there was an error transferring the files. In this case, refer to the Troubleshooting section

on page 39.
If a device name changes, the system indicates that a restart of the Acendo Vibe unit is required (FIG. 45):

FIG. 45
Transfer - Restart Required
4.
Close the File Open window.

Viewing/Modifying an Acendo Vibe Configuration File

1.
In the File Open window, click View/Modify settings in the application (see FIG. 40).
2.
The selected Acendo Vibe Configuration File is opened in the Acendo Vibe Configuration Tool.
3.
View and/ modify settings as desired:
See the Bluetooth Configuration Options section on page 22

See the Events Configuration Options (ACV-5100 only) section on page 23

See the Audio Configuration Options section on page 24

NOTE: To save changes, click File > Save in the Side menu (see FIG. 38 on page 25).
Acendo Vibe Conferencing Soundbars - User Guide
Configuring Acendo Vibe Conferencing Sound Bars
27