Hantek HSA2030 User Manual page 66

Level Display Range
Log Scale and Units
Linear Scale and Units
Scale Unit
Sweep (Trace) Points
Number of Markers
Detectors
Number of Traces
Trace Functions
Level Measurement Error
Reference Level
Setting Range
Setting Resolution
Amplitude
Maximum Safety Input Level
Measurement Range
Spurious Response
Second Harmonic Distortion SHI
Third-Order
Intermodulation TOI
Input Related Spurious
Inherent Residual Response
RF Input VSWR
(at Tuned Frequency)
10MHz Reference/External Trigger Input
Reference Iinput Frequency
Reference Input Amplitude
Trigger Voltage
Connector and Output
Impendence
Gennral Feature
Interface Language
Display Index
Temperature Range
Relative Humidity
1 to 10 dB/divisions in 1, 2, 5, 10 dB steps, 10 divisions displayed
0 to 100%, 10 divisions displayed
dBm, dBmV,dBuV,Watts Volts
461
4
Normal, positive peak, dample, negative peak, RMS
4
Clear/write, maximum hold, minimum hold, average, check close
±1.5dB(excluding input VSWR mismatch)
20~30 peak detector, preamplifier off, input signal -50dBm to 0dBm
-100dBm to +30dBm, steps of 1dB
Log scale
Linear scale
Average continuous power
DC input voltage
9KHz~2MHz
2MHz~3GHz(1.6GHz)
Input attenuator range
<65dBc 50MHz to 3GHz(1.6GHz) Mixer level -30dBm attenuator =0dB
preamp off 20 ~30
50~300MHz
300MHz~3GHz 1.6GHz
<-75dBc, (input mixer = -30dBm)
<-90dBm typical -98dBm (Input terminated and 0 dB RF attenuation,
preamplifier off)
10MHz to 3GHz(1.6GHz)
10MHz
0~10dBm
5V TTL level
N female
English Chinese Chinese Traditional
5.7 inch 640*480 resolution 64M color LCD display
Working
Storage
<95%
0.01dB
Almost log to 7.07V
+33dBm
50Vdc
Displayed average noise level (DANL) to
+10dB
Displayed average noise level (DANL) to
+20dB
0 to 51dB,1dB steps
+8dBm, Third-order intermodulation
products 2 x -20dBm; frequency
separation 100KHz: attenuation =
0dB; preamp off, 20 ~30
+10dBm
1.5:1, nominal Attenuator setting
10~20dB
-10 to +50 , battery 0
-40 to +70 , battery :-20
to 50
to 50