Demodulation Subsystem; Am Demodulation; Fm Demodulation - Hantek HSA2030 User Manual

Check the minimum amplitude value on the trace.
Command format:
CALCulate:MARKer:MINimum
Function description:
Check the minimum amplitude value on the trace, and mark it with current marker.
Instruction
Turn on or off the continuous peak search
Command format:
CALCulate:MARKer:CPEak[:STATe] OFF|ON|0|1
Function description:
Turn on continuous peak search and mark the peak with current marker. Or turn off
the continuous peak search.
Instruction
If there is no marker be turned on, it turns on Marker 1 automaticly and marks peak.

5.4 DEMOdulation Subsystem

5.4.1 AM Demodulation

Command format:
DEMod:AM:STATe OFF|ON|0|1
DEMod:AM:STATe?
Function description:
This command toggles AM demodulation function between on and off.
Check the on and off status of AM demodulation function.
Return format
Return 0 or 1

5.4.2 FM Demodulation

Command format:
DEMod:FM:STATe OFF|ON|0|1
DEMod:FM:STATe?
Function description:
This command toggles FM demodulation function between on and off.
Check the on and off status of FM demodulation function.
Return format
Return 0 or 1